The best way to make your filament
Felfil Spooler automatically collect the filament into the spool while calibrating it.
A new filament winder
Thanks to Felfil Spooler+, the filament that you extrude will be automatically spooled. The system is very simple: place Felfil Evo, the fans and Felfil Spooler one beside the other, make sure that the filament that you extrude passes through the supports, and let it begin to spool.
In addition to the convenience of not having to manually wrap the filament, which means you will operate more quickly, with this system you will have an even higher quality extrusion. Indeed Felfil Spooler is equipped with a filament diameter controller that will guarantee a more constant filament thickness and will automatically calibrate your filament.
Felfil Spooler+ has automatic settings for the most common material, but it can also be used in manual mode for experimental materials. Moreover, the distributions allows to distribute the filament on the spool and the clutch does not stretch it; four fans, which airflow is adjustable, cool down the filament before misure it.
Felfil Spooler allows to use almost any type of spool thanks to its design.
Technical Specifications
Physical Dimensions
Width 348mm
Depth 150mm
Physical Dimensions
Height 175mm
Weight 3,5kg
Accuracy
Diameter sensor accuracy is 10 micron
Usability
It can work stand alone with other extruders
Output
The diameter range is between 0.5mm and 3.5mm
Speed
The puller wheel can spin to max 9m/minute
Smart
Felfil Spooler adjusts its speed according to the diameter
Independent
It can work with other extruder
Diameter Range
From 0.5mm to 3mm
High Precision
Sensor accuracy 10 micron
Presets
Available for PLA, ABS and PETG
Stat Voice
See how many meters you produced
Manual Mode
Make your custom material with your settings
OPEN SOURCE
All the Spooler project is open
STANDARD SPOOL
It can works with many type of standard spools
Complete your extruding system with Felfil Spooler+
Distribution
The traverse speed it adjustable according to the flow of the extruder, and the dimension of your own spool. Moreover, a clutch allows to not stretch the filament, guaranteeing better results
In this way the extruded filament will be distributed neatly: don’t worry about tangles.
Calibration
Felfil Spooler integrates a high accuracy diameter sensor (10 micron accuracy) which allows you to control the diameter constantly during the extrusion process. Moreover, its software automatically adjusts the puller speed in order to guarantee a high consistency filament.
The puller wheels are made in soft urethane (50 shore). As a result, you can use them with both filament size without pressing the filament.
